DB9P TO IDC10P IDC Ribbon Cable Connection Cable Soldered D-SUB
Male Cable
Product introduction
The IDC Ribbon cables is small in size and light in weight. The
original design of the cable board was used to replace the larger
wire harness wire. The IDC Ribbon cables is currently the only
processing method to meet the requirements of miniaturization and
mobile on the assembly board of the plug-in electronic sub-device.
The IDC Ribbon cables is etched copper circuit or printed polymer
thick film circuit on the polymer substrate. For devices that are
thin, light, and have a compact and complex structure, their design
and processing plans range from single-sided conductive circuits to
complex multi-layer three-dimensional assembly. The total weight
and volume of the gray cable is 70% less than the traditional round
wire harness method.
Parameters:
| Place of Origin | Jiangsu,China |
| Brand Name | SYH |
| Model Number | SYH-FI009 |
| Application | Electronic,Automotive,Electrical,Industry,Home application |
| Connectors | DB9P TO IDC 10pins or Customized |
| Wire | 28AWG |
| Wire length | 150mm or According to the customers' requirements |
| Wire Color | Gray,red or Customized |
| Certification | ISO9001, T/S16949, Rohs |
| MOQ | Small quantity can be accepted |
| Sample | Sample can be provided for evaluating |
| Sevice | OED ODM accepted |
| Delivery Time | 3-15 days upon receipt of payment |
| Packaging | 00/200/300/500pcs per bag , then outside carton |
| Test | Professional breakover and pulling force test before goods sent out |
Features:
1. Small size and light weight is the only solution to meet the
requirements of miniaturization and movement;
2. It can be moved, bent and twisted without damaging the wire, and
can meet different shapes and special package sizes;
3. The IDC Ribbon cables has excellent electrical properties,
dielectric properties and heat resistance;
4. The IDC Ribbon cables has higher assembly reliability and
quality.
All crimping methods at both ends of the IDC cable:
(1) In the same direction, the convex points are consistent
The direction du of the two baiIDC crimping heads is the same, and
the direction of the bumps is also the same. The conventional
pressing method of three zhi angles to the red edge is also called
dao one-to-one pressing method. Eighty-five percent of customers
use this pressing method! 6-34P can be crimped with an automatic
pressing machine.
(2) In the same direction, the convex points are opposite
The direction of the two IDC crimping heads is the same, and the
direction of the bumps is opposite. Everyone will ask how the bumps
are different. The two-piece buckle is the direction of the
three-piece buckle! The conventional method is to make three-piece,
so here we are talking about the three-piece directional bump!
(3) In the same direction, the convex points are opposite
The direction of the two IDC crimping heads is the same, and the
direction of the bumps is opposite. The upper one is a three-piece
type, and the lower one is a two-piece type with no reverse buckle!
The three-piece direction bumps are subject! If you need a
two-piece type, pay attention!
(4) Positive and negative, the convex points are consistent
The direction of the two IDC crimping heads is opposite, and the
direction of the bumps is the same. The upper one is a three-piece
type, and the lower one is a two-piece type without a back buckle!
The conventional is to make a three-piece type, so here we are
talking about the three-piece direction bumps!
(5) Positive and negative, convex points are opposite
The directions of the two IDC crimping heads are opposite, and the
directions of the bumps are opposite, which means the opposite. The
upper one is a three-piece type, and the lower one is a two-piece
type without a back buckle! The conventional is to make a
three-piece type, so here we are talking about the three-piece
direction bumps!
(6) One positive and one negative, the convex points are relative
The direction of the two IDC crimping heads is opposite, and the
direction of the bumps is opposite. The upper one is a three-piece
type, and the lower one is a two-piece type without a back buckle!
The conventional is to make a three-piece type, so here we are
talking about the three-piece direction bumps!
The above six crimping methods are all crimping methods at both
ends of the finished IDC cable. These six crimping methods are used
in IDC gray cables with different positioning!
Widely used in various connectors and connectors such as computers,
instruments, machines, appliances, automobiles, color TVs, air
conditioners, LED displays, DVDs, VCDs, etc.
